Production boards and technical documents
from selection through post-delivery
This section lists the boards in production for the drive and control line; selection can start from applications such as fans, ventilation, water pumps and power tools. Interfaces and power ratings are adjusted to the appliance, and technical documents, selection advice and commissioning support are handled below.
Main applications and board types
Board selection starts from the application. The list below covers the main industries served; the board types and typical configurations for each are listed in the next section.
Fans and ventilation systems
Custom high-voltage motor drive boards
High-voltage ceiling and commercial fans
Custom drive and control boards
Inverter range hoods
Efficient, cost-effective drive boards
Constant-pressure water pumps
Constant-pressure control boards
Power tools
Drive control boards
Other motor applications
Customized to the specific application
Production boards and typical configurations
The boards for the applications in the previous section are grouped by industry below. Listed values are typical configurations; interfaces and power ratings are adjusted to the appliance.
Fans and ventilation systems
Industrial Turbo Fan Control Board
For continuous-duty industrial turbo fans: power stage sized for the high-power band, speed controlled linearly by an analog input.
- rated input voltage
- AC220V
- rated input power
- 2200W
- speed control and interfaces
- VSP
- additional features
- PFC (power factor correction)
Dual-Flow Ventilation Control Board
For dual-flow ventilation units: supply and exhaust valves are switched independently on one board, holding airflow steady through changeover.
- rated input voltage
- AC220V
- rated input power
- 1200W
- speed control and interfaces
- VSP · RS485
- additional features
- Independent control of left and right valves
Duct Fan Control Board
For in-duct fans in confined housings and continuous duty: speed set by bus command or analog signal.
- rated input voltage
- AC220V
- rated input power
- 100W
- speed control and interfaces
- VSP · RS485
- additional features
- —
- end-product certification
- CCC
High-voltage ceiling and commercial fans
Industrial Ceiling Fan Control Board
For 120 V industrial ceiling fans in North America: remote speed steps and on/off are decoded by an on-board 433 MHz receiver.
- rated input voltage
- AC120V
- rated input power
- 150W
- speed control and interfaces
- 433 MHz remote
- additional features
- —
- end-product certification
- UL
Industrial Bracket Fan Control Board
For wall-mounted industrial bracket fans: remote, keypad and encoder inputs coexist on one board.
- rated input voltage
- AC220V
- rated input power
- 200W
- speed control and interfaces
- 433 MHz remote · key switch · encoder
- additional features
- —
- end-product certification
- CE
Dual Low-Voltage Ceiling Fan Light Control Board
For ceiling fan lights with two outputs: motor and lighting are supplied separately and switched independently from the remote.
- rated input voltage
- AC220V
- input power
- Motor 36W / lighting 25W
- speed control and interfaces
- 433 MHz remote
- additional features
- Dual output (motor + lighting)
- end-product certification
- CE
Inverter range hoods
Three-Fan Range Hood Control Board
For three-fan range hoods: all three fans ramp together on one command, with speed steps tied to air pressure.
- rated input voltage
- AC220V
- rated input power
- 900W
- speed control and interfaces
- UART
- additional features
- PFC (power factor correction)
- end-product certification
- CE
High-Voltage Range Hood Control Board (India)
For mains with wide voltage swings: one board covers the full input range, reducing the number of region-specific variants.
- rated input voltage
- AC90–310V
- rated input power
- 750W
- speed control and interfaces
- UART
- additional features
- PFC (power factor correction) · suitable for wide-voltage mains
- end-product certification
- CE
Commercial Range Hood Control Board
For commercial kitchen hoods: bus, analog and serial interfaces on one board, selected to suit the host controller.
- rated input voltage
- AC220V
- rated input power
- 750W
- speed control and interfaces
- VSP · RS485 · UART
- additional features
- —
Low-Voltage Range Hood Control Board
For low-power, cost-sensitive hoods: speed steps set directly by a mechanical key switch, with no protocol or external controller.
- rated input voltage
- AC230V
- rated input power
- 30W
- speed control and interfaces
- key switch
- additional features
- —
Dual-Motor Range Hood Control Board
For dual-motor range hoods: the left and right motors run independently on one board, each ramping to its own load.
- rated input voltage
- AC220V
- rated input power
- 700–1000W (per appliance configuration)
- speed control and interfaces
- UART
- additional features
- —
- end-product certification
- CE
Power tools
Electric Pruner Control Board
For battery-powered electric pruners: current at a jammed blade is limited on-board, with torque held at low cutting speed.
- rated input voltage
- DC14.4V
- rated input power
- 150W
- speed control and interfaces
- —
- additional features
- Sensored (Hall) position detection
Other motor applications
Liquid-Cooling Pump Control Board
For circulation pumps in data center liquid-cooling loops: high pump power on a low-voltage DC bus, speed set by bus or PWM.
- rated input voltage
- DC48V
- input power
- Motor 800W
- speed control and interfaces
- PWM · RS485
- additional features
- Data center liquid-cooling loop
The boards above are part of the models in production; some models are covered by customer confidentiality terms and are not shown here.
Listed values are typical configurations. Certification is applied for by the appliance manufacturer; we provide design documentation and support corrective actions.
Send your requirementDocuments, selection advice and commissioning support for these boards are handled in the Support section below.
Technical documents
Technical and explanatory documents that can be shared externally. Before publication each document is redacted, its version checked and its rights cleared.
Three types by purpose
- Technical: white papers, notes on method and principle, application notes.
- Product: product selection guides, specifications for finished boards and kits.
- Company: company profile, notes on the entities and group structure, management system certificates and qualifications (this complements the About us page; the full text is not repeated).
| Document | Business line | Type | Update | How to obtain |
|---|---|---|---|---|
| Company profile | Company | Company | In preparation | On request |
| Product selection guide | Drive and control | Product | In preparation | On request |
| Specifications for finished boards and kits | Validation and smart manufacturing | Product | To be confirmed | On request |
| Component selection and alternatives | Electronic components | Product | To be confirmed | On request |
| Management system certificates and qualifications | Company | Company | To be confirmed | On request |
Technical support
Covers four stages: selection, application, document requests and post-delivery. The exact scope and how to get in touch can be confirmed through the contact details at the bottom of the page.
Selection and design support
We advise on drive method, voltage and power range, host MCU and power devices, based on the end application and motor conditions, and set out which paths are feasible and which do not apply. This can be read together with the design scope on the Drive and control page.
Commissioning support
For projects already at prototype or pilot stage, we help work through application-side issues such as start-up, speed control, noise and temperature rise, and advise on parameter changes and alternative peripheral parts.
Technical document requests
Requests are handled within the document scope listed in the table above and sent once contact details are provided, so that updated versions also reach customers already in contact. Please state the intended use and the business line concerned, so we can locate the right version.
Post-delivery support
The entry point for technical matters after delivery of finished boards and design kits, covering clarification of instructions, component replacement and version update queries. Requests can be submitted by phone or email.
Five steps from first enquiry to post-delivery
Send your requirement
Describe the end application, the motor conditions (voltage / power / speed), the functions you need and the quantity, so we can judge which path applies.
Selection advice
We advise on the drive approach and component configuration, setting out what is available and what does not apply. Unverified performance figures are not included.
Samples and prototyping
Samples or prototype boards are supplied against the confirmed design (see Validation and smart manufacturing), together with the test basis used.
Testing and tuning
Application-side testing and parameter adjustment, with help in diagnosing application issues where needed. Test data is confirmed by both parties.
Volume and post-delivery
The Jiangmen base handles volume manufacturing, and components are matched under manufacturer authorization. Post-delivery technical matters go through the entry point above.
Advance together, share the harvest
Board selection and document requests
Tell us the application, the motor conditions and the documents you need; we will shortlist suitable boards, give selection advice and send the matching document versions. All three business lines can be handled directly.